Support Request #608: Synchronization between Canape and ADTF Measurement - Public Support - digitalwerk community

Actions

Copy link

Support Request #608

closed

Synchronization between Canape and ADTF Measurement

Added by hidden almost 7 years ago. Updated over 6 years ago.

Status:

Closed

Priority:

Normal

Customer:

BOSCH

Department:

CC-DA/EPR

Requester's Priority:

Normal

Support Level:

2nd Level

Resolution:

Solved Issue

Product Issue Numbers:

Affected Products:

ADTF 2.14.0

Platform:

Windows 7 64bit

Topic:

ADTF::Automatization

FAQ Links:

Description

Supportanfrage

Dear Digitalwerk Team,

I would like to implement a triggered measurement between Canape and ADTF computers. The measurement will be started and stopped in Canape computer and a signal should be sent to ADTF computer to communicate the request.

Could you please advise on the best methods to implement this sync so that the measurements are time synchronized during the recording ? Are there any additional advices required to make this happen?

Many thanks!

Best Regards,
Abdullah

Lösung

I would prefer an alternate way as I try to suggest to use a python script.
In this script you start CANape and ADTF (initialize) and than start ADTF after CANape.
With this generic solution you can control both environments.

For information about using Python in combination with ADTF please have a look at the ADTF SDK Documentation:

Python Support Service
Using Python modules
The ADTF Python Package
Starting and automizating ADTF
Demo Python Project
Demo Extended Python Project

Only thing you have to do is to provide the clock from CANape in ADTF (or the other way) or use the same.
For implementation and help with CANape we cannot support.

To exchange the clock in ADTF, please refer to ADTF SDK Documentation:

ADTF Clock Handling
- Advanced
Demo Clock Filter

This would be a good solution I think to complete your use case.

Actions

Copy link

Updated by hidden almost 7 years ago

Project changed from Public Support to 5
Status changed from New to In Progress
Affected Products ADTF 2.14.0 added
Platform Windows 7 64bit added

Actions

Copy link

Updated by hidden almost 7 years ago

Status changed from In Progress to Customer Feedback Required
Topic set to ADTF::Automatization

Dear Abdullah,

For information about using Python in combination with ADTF please have a look at the ADTF SDK Documentation:

Python Support Service
Using Python modules
The ADTF Python Package
Starting and automizating ADTF
Demo Python Project
Demo Extended Python Project

Only thing you have to do is to provide the clock from CANape in ADTF (or the other way) or use the same.
For implementation and help with CANape we cannot support.

To exchange the clock in ADTF, please refer to ADTF SDK Documentation:

ADTF Clock Handling
- Advanced
Demo Clock Filter

This would be a good solution I think to complete your use case.

Please give us a short feedback if this issue is solved.

Actions

Copy link

Updated by hidden almost 7 years ago

Dear Florian,

Thank you for your prompt support. :)

The python script solution is a good idea. Do you have an idea how this interface between Canape and ADTF be realized on two separate PCs? Can this be done through LAN?

Regards,
Abdullah

Actions

Copy link

Updated by hidden almost 7 years ago

Dear Abdullah,

With this solution it is not necessary to communicate between ADTF CANape.
You control both application and measurements from the python script.

Or do you need to exchange measurement data between both ?

As your initial requests says, it was only your aim to start ADTF from CANape.

Actions

Copy link

Updated by hidden almost 7 years ago

Dear Florian,

There is no need to exchange measurement data between ADTF and CANape aside from the commands to start and stop measurement.

Physically, how can this be realized on two separate computers? Do I require a LAN network to make it work?

Thank you.

Mit freundlichen Grüßen / Best regards

Abdullah Bin Omar Salleh
CC-DA/EPR1

Actions

Copy link

Updated by hidden almost 7 years ago

Dear Abdullah,

There is no need to exchange measurement data between ADTF and CANape aside from the commands to start and stop measurement.

Then I think our support scope is here done. Let me know if your issue is solved.

Physically, how can this be realized on two separate computers? Do I require a LAN network to make it work?

It is python thing, yes.
I would suggest that you implement all your setup, start, stop and whatever in python on any machine.
One or more machines with ADTF and one with CANape can be controlled over network from python I guess.

Actions

Copy link