ADTF Device Toolbox 3.2.0 is now available
Package - ADTF_DeviceToolbox/3.2.0@dw/stable
NEW Online Keytopics (Draft)
Overview of Products and Documentation
IMPORTANT RELEASE NOTES
- Requires at least ADTF 3.7.0
- ADTF Device Toolbox 3.2.0 Release Notes
- System Requirements
- Product Information
- Known Problems
- Release Notes Archive
HIGHLIGHTS
- SOME/IP payload decoding and deserialization
- Provide SOME/IP Service
- Definition of adtf::devicetb::sdk::someip::ISomeIpDatabase to create own parser
- Definition of adtf::devicetb::sdk::someip::ISomeIpDecoder to interpret payload
- Support also RAW/ASCII mode in SOME/IP Trace View when no parser is present
- Warning: There is no SOME/IP parser delivered within Device Toolbox, only the interface to implement or add an existing one - this is the definition and requirement by customer forum! This means that SOME/IP decoding does not work out of the box and you have to buy or implement a SOME/IP parser solution compatible to provided interfaces! If you have any questions, please contact the support.
- Common adaptions regarding SDK and delivered components
- Repair encoding and decoding (especially for CAN and CAN FD)
- See also The Device Toolbox Filters
- See also Signal Config Filter Editor (SCFE)
- Repair ADTF Device Toolbox 2.x Support for CAN and CAN FD recordings from ADTF 2.x
- Also bus data exchange from/to ADTF 2.14.x using ADTF 3 Support Tool 3.1.0
- Extend CAN and CAN FD to support up to 16 channels
- Implement missing features for Config Codecs
- See also The Device Toolbox Filters
- See also Signal Config Filter Editor (SCFE)
- Pack bus specific Streaming Sources and Streaming Sinks in one adtfplugin (CAN, CAN FD and FlexRay)
- This means you have to adapt your dependencies (e.g. adtfsystem files) if you are running an ADTF Session set up with Device Toolbox < 3.2.0
- Easiest way: Open your project in ADTF Configuration Editor, navigate to System Editor -> Plugins (Release), open the context menu and execute 'Removal all' and 'Look up'. Repeat this for the debug adtfplugins as well
- Provide ASC Reader for CAN and CAN FD
- Repair encoding and decoding (especially for CAN and CAN FD)
- Documentation, Guides and examples extensions
- Extend adtf::devicetb::sdk::IBusDatabaseLoader interface with additional additional_parser_parameters (adtf::devicetb::sdk::BUSDB_PARSER_ADDITIONAL_PARAMETERS_PROP)
- Add UI support to configure Demo DirectShow Capture Device
- Adapt Doxygen documentation to ADTF design and add missing components
- Create guides for Device Toolbox
- Provide a coder example for CAN FD
- Provide example session for SOME/IP
- See also ADTF SOME/IP Guide
- Add description and help links to all delivered components
- Upgrade External Dependencies
- Support for ADTF 3.7.0
- Support for ADTF File Library (IFHD) 0.6.1
- Support for a_util 5.6.0
- Support for ddl 4.4.0
- Support for ADTF Utils 4.1.4
- Several improvements, stability and bugfixes, please refer to ADTF Device Toolbox 3.2.0 Change Log
CHANGES
- [ADEVTB-1507] - Provide CAN/CAN FD ASC Reader for ADTF DAT Tool
- [ADEVTB-1523] - Define and Implement SOME/IP Service
- [ADEVTB-1526] - MS2: Provide decoding for SOME/IP data and parser interface
- [ADEVTB-1572] - Define ISomeIpDatabase
- [ADEVTB-1580] - Create guides for Device Toolbox
- [ADEVTB-1638] - Update BusDatabaseLoader-Interface
- [ADEVTB-1649] - Define and Implement ISomeIpCoder
- [ADEVTB-1652] - Add descriptions to all components using ADTF 3.6's new SetDescription function
- [ADEVTB-1657] - SOME/IP payload deserialization
- [ADEVTB-1682] - Provide short description for each component
- [ADEVTB-1683] - Provide UI support to configure Direct Show Capture Device
- [ADEVTB-1691] - can service should always prefer last registered parser
- [ADEVTB-1721] - Make loading of adtf_file plugins optional
- [ADEVTB-1727] - Add missing features to config codec
- [ADEVTB-1739] - Provide support for 16 channels
- [ADEVTB-1747] - Support for ADTF 3.7.0
- [ADEVTB-1755] - Services must return error, if parsing fails and log if no database is set
- [ADEVTB-1758] - Provide CAN FD Coder example
- [ADEVTB-1764] - Add doxygen page for SOME/IP
- [ADEVTB-1767] - Show decoded payload in the SOME/IP Trace View
- [ADEVTB-1778] - Create SOME/IP example session
- [ADEVTB-1805] - Add help link for all delivered components
- [ADEVTB-1807] - If there is no parser - Show SOME/IP raw data in raw and in ASCII
- [ADEVTB-1810] - Include Guide for Some/IP
BUGFIXES
- [ADEVTB-1503] - IEEE Floats/Doubles are interpretated as signed integer
- [ADEVTB-1569] - Failed database parsing/initialzation because Bus Support Services are registered in RL_System instead RL_Session
- [ADEVTB-1648] - Problems setting higher resolution
- [ADEVTB-1668] - Combobox items in CAN Trace Views are not checkable on Linux
- [ADEVTB-1671] - Linux delivery contains windows batch file
- [ADEVTB-1687] - Change of framerate, height and width property value has no effect on the demo_direct_show_capture_source
- [ADEVTB-1690] - Unable to load old parser in newer DevTB
- [ADEVTB-1709] - CAN Signal provider leads to crash in example
- [ADEVTB-1712] - CANFD Signal provider leads to crash
- [ADEVTB-1715] - Flexray Signal provider leads to crash
- [ADEVTB-1719] - CAN Config Encoder does not sent values
- [ADEVTB-1720] - Parsers should check case insensitive file extensions
- [ADEVTB-1735] - CAN FD Encoder and Decoder pin creation is wrong
- [ADEVTB-1738] - CAN and CAN FD Config Decoder does not send values
- [ADEVTB-1740] - adtf2 deserializer cannot deserialize adtf2 canfd samples.
- [ADEVTB-1752] - CAN Trace View lists signals two times
- [ADEVTB-1762] - CAN FD Receiver does not receive data
- [ADEVTB-1771] - Sending and receiving CAN/CAN FD/FlexRay Streams within a single session does not work
- [ADEVTB-1775] - CAN and CAN FD Encoder do not set the time within tCANData and tCANFDData
- [ADEVTB-1793] - CAN FD Signal Config Editor generates invalid MAP file
- [ADEVTB-1796] - Unable to deserialize CAN data received from Support Toolbox
- [ADEVTB-1802] - CAN DBC Parser check for Floating-Point signals failed
- [ADEVTB-1803] - CAN FD DBC Parser check for Floating-Point signals failed
- [ADEVTB-1813] - <Bus> Trace View Crash on shutdown
Your Digitalwerk Team
Comments